Hi, I'm new on here so appologise if this has been asked before. I'm restoring an MC16 and after trial fitting the exhausts, i have noticed the left hand silencer is parallel to the bike but the right hand side tapers away from the bike (a fair bit) iv tried 3 spares and it's the same. I guess this is wrong and they should both be straight to the bike?? Every picture I can find shows the right hand side sticking out but surely this is incorrect. Any help would be hugely appreciated. Cheers

Both silencers should be pretty much parallel. Sounds like the expansion chamber is bent.

You should be able to pick one of those up pretty cheap.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

I have a pair of MC16 expansion chambers I no longer need. They are are straight and in decent condition

Thanks for the replys, im going to have a go at warming the end of the expansion chamber first with the welding bottles now i know its definitely wrong and if that doesn't work i will let you know. Cheers.

Thanks for the replys, im going to have a go at warming the end of the expansion chamber first with the welding bottles now i know its definitely wrong and if that doesn't work i will let you know. Cheers.

I forgot to mention, they are free