I know theres a few of us running them on our bikes.
I wired mine up as per the 'instructions' and i have a
lil issue with the back lighting staying on even when
the bike is shut off and the key taken out. This is
weird considering that i hooked the daytona power wire
to the red wire on my ignition switch. Any of you
guys have the same problem? Is there a better wire to
hook this up to?

Hook it up to the Red/Black wire. This is powered after the main ignition switch. The red light has power all the time from the battery.

Alternatively, hook it up to any Black/white or Black/Brown wire as this is powered after the RUN/OFF switch.