So I've got around to install the NF5 transmission into my MC21, unfortunately it hasn't gone quite to plan!!
Installed with no issues, however when it came to trying to put the bike into gear it was was not happening
Adjusted the clutch and moved the gear linkage on the spindle and still no joy!
so I made the decision to take out and see if there were any obvious issues.
With the transmission out again, I noticed the left shift fork was an NF5 one 24213-NF5-710, however the centre and right shift forks are KV3. looking at the HRC 90-93 set up manual the centre shift fork should be 24213-NF5-710.
from my very limited knowledge would or should the transmission work with the KV3 centre fork shift selector?? (just answered my own question!! having a look at the parts list for an 87 NF5 the right & centre shift forks are KV3)
any suggestions as I'm at a lose atm!!
cheers