need advice from premix runners

**Sun Nov 06, 2005 5:29 pm » Post: #1 » Download Post**

hey,

If you are a premix runner, could you tell me how you blocked off the oil feeds on your carbs please?

Cheers
_________________
After years of moaning about immigrants now i am one...

**Sun Nov 06, 2005 6:21 pm » Post: #2 » Download Post**

Easiest method is to solder them shut Wink

_________________
NSR300R - Why did i ever have a 250...

**Sun Nov 06, 2005 7:45 pm » Post: #3 » Download Post**

I believe the solution on the tuning section of the site recommends a piece of pipe which fits the stub ends, and put a ball bearing in the middle of it.
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

**Tue Nov 08, 2005 3:05 am » Post: #4 » Download Post**

So many ways of doing this.

Dave's way is the same as Jha recommend. Or you can get those little blanking caps that will pop on. Or you could epoxy them closed. Or...or...or