Hello
I have a 1994 nsr250 mc28 and I would like to remove the oil injection so that I can run permix. Can anyone tell me how to accomplish this? Thanks
You'll need to make or buy a blanking plate to fit over the hole left when you remove the oil pump. You'll also nee a piece of tube with a ball bearing in the middle to blank the oil feed holes in the inlet manifold.
Why do you want to go premix? _________________ MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball
I want to get rid of the auto lube for two reasons. One is to prevent a failure of the auto lube system and to simplfy things. Two is to provide a more consistant mixture to the motor. This is one of six bikes that I own. I do not rely on this for transportation.
Ah. Well, if it's for street use, you'll find 90% of us say don't bother. Pump failure is almost unheard of, especially on the road. A lot (me included) even keep it on for racing. Still, if you wanna loose it, you'll need the plates and it's a very simple job really. _________________ MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum