have you guys heard of these brake pads? any good?

what do you guys recommend?
_________________
93' MC21

Vesrah make a huge range of brake pads and shoes that cover virtually every model you can think of. They also make clutches, gaskets, even filters and brake discs, and are a massive company!

I am currently using HRC pads in the front, and Brembo "green" pads in the rear. Up until last summer I ran the Brembo greens in the front too, and only switched as I was given a set of HRC pads to try.

I may be adding the HRC pads to the Marketplace soon.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

I personally think they are green and cr*p.
Better off with EBC, Carbone Lorraine or Dunlopads.
The vesrahs i have used where not sintered which the others are.
BOSOZOKU .
_________________
MC21R Repsol replica
SC36 'Fire storm'
RG250 MK3 GAMMA 'WALTER WOLF'
DR350SEV winter hack

i use the Carbone Lorraine sintered in the 29 and they are fantastic on track.
_________________
MC21SP - Roth-tax
CBR400 - track
MC21R - sold
MC21SP - sold

BOSOZOKU wrote:I personally think they are green and cr*p.
Better off with EBC, Carbone Lorraine or Dunlopads.
The vesrahs i have used where not sintered which the others are.
BOSOZOKU .

Agreeded, i dont like em either, brake fade on track days and not to good in the wet, but they where standard pads, Ive used Carbone Lorraine and currently use Double HH Sintered EBC pads and both are real real good, all conditions!

I swear by EBC HH, but I'm currently using Brakings HH's with Braking Discs and the stopping power is scary... (in a good way )
_________________
NSR300R - Why did i ever have a 250...

maxim wrote:I swear by EBC HH, but I'm currently using Brakings HH's with Braking Discs and the stopping power is scary... (in a good way )

nothing to do with the radial master cylinder and 600RR radial calipers then.
_________________
MC21SP - Roth-tax
CBR400 - track
MC21R - sold
MC21SP - sold

no track days for me, just a street bike....

occasional hard braking but other than that i dont brake too hard so i'm thinking these will do the job..

I tried to replace my old pads with the versahs but the pistons wont budge,

any suggestions, i know if you just put in new brake fluid it wont move but the last time i refilled was like a 2 months ago..

any suggestions?
_________________
93' MC21

aikawa wrote:I tried to replace my old pads with the versahs but the pistons wont budge,

any suggestions, i know if you just put in new brake fluid it wont move but the last time i refilled was like a 2 months ago..

any suggestions?

if you mean that the pistons have siezed then you need to give them a clean with brake cleaner.
_________________
MC21SP - Roth-tax
CBR400 - track
MC21R - sold
MC21SP - sold

nsrmonkey wrote:

maxim wrote:I swear by EBC HH, but I'm currently using Brakings HH's with Braking Discs and the stopping power is scary... (in a good way )

nothing to do with the radial master cylinder and 600RR radial calipers then.

might have...
_________________
NSR300R - Why did i ever have a 250...