I would like to thank the guys who stepped up to help me open the account with Talon Engineering, and also Scott at Talon for working with me.

I know my requirements for this order were pretty unforgiving, so I appreciate the way everyone paid up promptly and on time, and that some of you actually over-paid a little and left the balance as a donation towards the upkeep of the Site. (Not to everone, but I hope a couple of you guys realise the price is plus shipping... you've lost that donation you offered now!!! )

I was speaking to Scott today to confirm colours etc., and he says there is a possibility of a billet NSR250 dry clutch basket:



Would anyone be interested? I will need to take him a stock one to measure up, and I would need to make another minimum order to keep the price somewhere near civilised!

No idea of price yet, I just want to know if anyone is interested.

By the way, everyone who asked gets gold coloured rears, the rest (er, I think just me!) gets silver! See, I'm not such the tart you think I am Fontyyy!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Yes I'd be interested in the clutch basket, dependent on price of course!
_________________
NSR300R - Why did i ever have a 250...

they look sh*t hot andy i will have one if the price is right. i have not got a dry clutch but it would look good on my desk anyway

I didnt pay shipping as i said i will collect them when i come down your way in a few weeks and my over payment was to pay for those Swinging arm spacers,are they in the post yet Mr Grant? I will make a donation when i come down your way in the form of Lager tokens

If the price is right, I'd be interested in 2 clutch baskets, as mine are a little worn already.
_________________
Poul
"If Life Gets Boring, Risk It!"
MC21SE, KISS box
MC21SP, HRC box, racing loom

nsr.wayne wrote:
I didnt pay shipping as i said i will collect them when i come down your way in a few weeks and my over payment was to pay for those Swinging arm spacers,are they in the post yet Mr Grant? I will make a donation when i come down your way in the form of Lager tokens

You should've already received those spacers Wayne! Hmm... I'm off to check where I sent them to now!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Maxim, John, and Poul, I'll keep you posted!

It could look promising. I'll get a price on a Honda one out of curiosity.

Oh, and Fenton... time you got one of them there fangled dry clutch thingies!!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Oh, and Fenton... time you got one of them there fangled dry clutch thingies!!

if you have one stuck to a sp motor ill have it

I would be up for a clutch basket for sure.I am also looking for a replacement clutch cover instead of the standard plastic one.Does anyone make a carbon one?

fenton wrote:

Oh, and Fenton... time you got one of them there fangled dry clutch thingies!!

if you have one stuck to a sp motor ill have it

I have one....... but its mine all mine.....ha ha ha .....just need time to put it in now
_________________
If you dont like the way that i ride.....Stop trying to keep up!!!!!

Andy wrote:Maxim, John, and Poul, I'll keep you posted!

It could look promising. I'll get a price on a Honda one out of curiosity.

Oh, and Fenton... time you got one of them there fangled dry clutch thingies!!

I paid £60 for a new one from Tyga.

Chester362 wrote:

Andy wrote:
It could look promising. I'll get a price on a Honda one out of curiosity.

I paid £60 for a new one from Tyga.

What, in total, including shipping/duty?
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

+ shipping. No duty.

Chester362 wrote:
[£60] + shipping. No duty.

Well, according to my abacus here, you need to allow for up to £110 for a stock basket from TYGA, as not everyone will be as lucky with importing parts. You must allow for shipping, VAT, and import duty on any foreign purchase, and look at it simply as a bonus if you don't get charged.

A genuine item from Honda UK is around £130, so I am informed.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

I'd be interested in a pimp arse clutch basket. They look c*nt hot!
let's see some prices Andy.
_________________
MC21 300R w/SE bits, Rossi 2001
MC28SE Silhouette Repsol