Rear head on front cylinder

**Mon May 08, 2006 3:33 am » Post: #1 » Download Post**

Well my mc21 is up and running Very Happy

( After a year Sad

). I did the rear head conversion while it was apart. I found out today that the front sparkplug wire is too short to reach the sparkplug from the stock mount. I was thinking of making a longer mount for the coil to mount on.

What other options do I have to fix this problem ?
_________________

**Mon May 08, 2006 3:37 am » Post: #2 » Download Post**

If you use th eshort plug and cap, the lead is just long enough! Wink

When I first did mine, before using the HRC parts, I simply cable-tied (tie wrapped) the coil to the clutch cable.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon May 08, 2006 4:18 am » Post: #3 » Download Post**

Hey Andy is there a shorter plug than the BR9ECM ? Is it the plugs they use in the RS250?

The spark plug sure looks close the front tire Laughing

_________________

**Mon May 08, 2006 4:26 am » Post: #4 » Download Post**

Have a look here!

Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!