Need an external gearbox shaft for an 88 MC18 urgently. Mine stripped its threads last week and I've got the Llandow trackday in less than a week. If you know where one is, or know where an MC18 is being broken, please let me know.

Cheers

Jim

Jim,

Is it a wet or a dry clutch box, input or output shaft, R2J or R5K?
_________________
If I have to take the carbs off once more...

I think its the shaft from the foot change to the gearbox, hes after stephen.
Jim! if you let me know the length, i'll see if the MC16 one is the same. i have one of them.

Hi Steve, Hi Jeff

It for a wet clutch MC18. Jeff's right, it's the external rod (about 10 inches long) that connects the external gearbox shaft and gearlever. It attaches to reverse threads at both ends.

Any chance you could send me a pic of the one you've got Jeff? My email is jim.moore@emap.com

Only snag is that I'd need it by Wednesday coz I'm going to the Llandow trackday. If it's the right bit, could I pay you through Paypal?

Cheers

Jim

Guys, I've managed to get hold of the part I wanted. Thanks for your help anyway.
Cheers