Hey, getting into the racing thing and would be interested in what every ones suggestions for those must have items (excluding replacement pegs, brake and gear selection levers and clutch and front brake levers) as a must for a track tool box?

To start the ball rolling I thought that a hack saw and or file might come in handy, plus a re wiring lock wiring tool, but they seem pretty easy to borrow, bunch of good blokes,

I know where does the list end but (when there’s no more money) within reason, thought it might be very helpful for us new comers to racing and track days!
_________________
MC28 Track Bike
01' Honda VTR 250 (previously owned)
05' Suzuki Gsx-R 600 (road bike)

just do what mick does and take a full engine

Where you race, a good set of ear plugs to miss out on the B/S about how good some riders say they are!
You have in close proximity to where you pit:
1. Portaloo - full of it!
2. Cattle Truck - ?????????????
Use your imagination!
But a tyre pump, air pressure gauge, tools to fit the front-end to lower or raise the forks/ Rear shock adjustment tool. Once the handling is right on the 'Goat Track', just fuel for the NSR.
Chain-Lube, and spaners to tighten chain if needed.
Phillips screw driver to remove carbs, floatbowl, 6mm spanner to change main jets.
And gear it to run about 1:3 front/ rear sprocket. Like 14:42.
R7