Hallo
Can anybody send me a Close-up Photo of the Oil-Pipe Unions, its the 5mm Elbows i need that screw into the inside of the Carburettor-Body
close to the Rubber-Manifold and are connected to the 2 Oil-Pipes that
go to the Oil-Pump.

Thanks
George

??

The oil tubes on the MC28 are press-fit into the carb outlet, not screwed. The tubes are bent at an angle. The 5mm threaded holes on the exact opposite sides of the carb outlets are normally plugged with a very small screw with an aluminum washer. Those holes are for carb syncing.

Does that help?
_________________
Paul Herr
'88 FZR4/GSXR/YZF Frankenbike
MY BIKE PICS