MC21 SE/SP Dry clutch

**Sat Feb 03, 2007 1:03 am » Post: #1 » Download Post**

Is it possible to put a MC21 se/sp dry clutch into a MC18 engine?

**Sat Feb 03, 2007 2:18 am » Post: #2 » Download Post**

This question has probably been asked a thousand times.

The mission goes straight in, but there are some differences. I believe something to do with the oil pump hole.

I'm sure Stephen will come along and help me out here.

**Sat Feb 03, 2007 2:53 am » Post: #3 » Download Post**

There's also the shift shaft, but it's all minor stuff, and all very straightforward when the bits are on the floor in front of you!

Fitting one to an MC16 however... now that's a horse of a different colour! (Are you listening beakergixer750cc?!) Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sat Feb 03, 2007 3:31 am » Post: #4 » Download Post**

I guessed i didnt try hard searching on the threads as i didnt see any topics Confused

Anyway thanks for the info Wink

**Sat Feb 03, 2007 3:33 pm » Post: #5 » Download Post**

Fitting one to an MC16 however... now that's a horse of a different colour! (Are you listening beakergixer750cc?!) Wink

Yes Andy but wont it be worth it! Laughing