just got home to see my pakage , made me very happy,

put em on and they dont fit, the holes are slighly off,

any help?

If fitting to stock chambers, the mounting holes need a tiny bit of relieving to allow th ecans to bolt up.

The fitment is common to many of the race pipes however.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

oh ok thanks m8, anyway u would recomend reviling them?

Generally you need to slot the holes. This can be done with a round file and a bit of huffing and puffing. Not a big job.

Andy's right, there can sometimes be a bit of a difference between manufacturers. Jha's are the biggest pain 'cos their's are up side down

Crafty buggers

Perhaps an opening for the NSR World shop... Small alloy adaptor donuts for mating after market cans to Stock pipes?
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

The cans already have a reversable end-cap with two different bolt patterns, that fit the vast majority of aftermarket (and many OEM) expansion chambers.

It's that crafty Honda 1mm (Matt and Steve will know what I mean!) that's needed to get cans to mate up to the stock NSR chambers - the sneaky buggers!!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

More like the dreaded 1mm.
_________________
If I have to take the carbs off once more...