Ready for me 300 lump when clutch is in stephen at least then i'll be able to see how fast i'm going,which at the moment is like a rocket in fact since i got a rc controller from jeff she is flying cant wait for trackday next week
Desperately need a mc16 rear seat cowl and a white vfr 400 mudguard oh and a good screen would be nice Can anyone help?
Cheers Rob

MC16F3 seat on its way to your remember Rob... or do I keep it for mine now?

I may have to give those R5K pipes a home when you slap the TYGA's on!

Clutch is still a no-go for a little while. We can do it, but time constraints say MC16 wet clutch/transmission for now.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Thats what hes got, I dont have the engine anymore. Mums looking after it till you pick it up Andy.
_________________
If I have to take the carbs off once more...

I'm seriously considering keeping this bike as it is as it's going so well and building up the one behind with the 300 lump,f3 bodywork etc i may even have a home for your rs250 forks Andy
This could all change if i blow her up at Brands though

If anyone has any decent parts that will fit a MC11 let me know....

I'm most interested in a set of unpitted forks, or a complete front end...

I think it's the same as the NS400R, but I'd be interested in anything better that will bolt straight on as long as it's not too expensive.

A set of nicer (RS250?) cans wouldn't go amiss too.......

Let me know

Phil

Today is a good dayto check out eBay for RS250 bits, there is loads of stuff.....

Check out my posting on the RS250 board for the best bits..

All the best

Phil
Bored at work again