Hi All,

89 MC18 for sale in San Francisco area with CA plate.

Cash needed for other racing projects.

This was my old racebike and is pretty quick and reliable. I did pretty well racing with the AFM.

I can sell bike as a racer with all the trick stuff or as a stock bike.

___________________________________________________________________
Trick bits on bike now and options:

PJ38 carbs and rs250 reed cages and manifolds

1990 F3 PGM2. Fits into the mc18 loom. I have never seen another.

89 rs250 forks and modified triples.

SP shock

MC21 rear wheel.

Technomag front wheel.

Dog fight chambers.

Beat up NX5 rs250 upper and lower on it now.

New airtech 88-89 rs250 upper and lower. needs installation.

Japanese market tail for mc21 or 28

MMAX box
__________________________________________________________

I also have garage full of parts too:

carbs
frames/subframes
engine parts (cylinders, heads, cases, trannys, etc, etc)
stock wheels
electronics (pgms, loom, speedo, tach, other parts)
Clean repaired stock MC18 bodywork. Full set with turns and headlight
21 airtech upper.
R forks and a couple shocks.
Stock pipes.
mirrors.
brackets.
cables.
Plus lots of other small MC18 bits.


Thanks,
dylan_benjamin at

yahoo

So what you putting together now Dylan? An RS250?
_________________
Charles Gallant

Hey Dylan,

What are you asking for it? Do you have any pictures you can send me? rvf400@gmail.com

thanks
allen

hi charles

Hey Charles,

I heard about your crash and frame issue. Hope you didn't get hurt. Did you find another frame? I've got a 92 rs frame if you want to build a Franken-bike. JK!

I'm not building another bike at the moment. I need the cash to help pay for a sailboat race to Hawaii. I've found the right boat but don't want to drain all the "house fund" to finance it.

This MC18 is not my super F3/RS racer but my first MC18 racer I built. Its still got some cool stuff on it though. It would be perfect for a new racer. I have a feeling I will have to put all the stock stuff back on and then sell it as a CA titled street bike. The trick parts would then go up on ebay. However someone might want the chambers, rs carb setup, F3 ignition, and RS forks on their new toy.

Hope you and Tamara are doing well,
Dylan

Ah, you doing the TransPac or the Pacific Cup?

You got some tuff competition! Is Philippe still running it with his no budget limit team?

I would crew for you if I still lived out there. of course my open water crewing has been limited to leisure sailing on a 45 foot cat for 9 days. All my racing crew experience has been in the Monterey Bay on a 30 foot single hull race boat, and the longest for that was overnighter, but mostly just regattas.

Good luck on selling the bike, and good to hear you keeping your racer. Looks like the 250 class needs you to come back as the grids are getting small. If I had stayed for another 2 years I could have been in the top 5
_________________
Charles Gallant

Hi Dylan, I have just taken possession of a 1991 MC18 but it reuquires most of the top end - barrels, pistons, rings etc can you help me. I live in New Zealand but have a paypal account if that helps. Regards Keith
_________________
Finish 1st? 1st Finish!!!

hello Im up in sacramento, I too have an mc18 ca plated, but I fried my regulator or pgm out at the track. Call me at 916 549 6418. Im very interested in the whole bike or lots of parts to get mine back on the road. Thanks alot, Bill V