Long time reader first time writer.

**Sun May 18, 2008 3:37 am » Post: #1 » Download Post**

Hi Guys,

I'm a Kiwi but don't hold that against me!!

I've just got my MC21 NSR up and running and took it out for a good blast yesterday.

It had a bit of a splutter in the mid range but once it got into the peak revs it was good as gold Shocked

.

I was just having a look throught the tech section to see if I have set everything up right and came across the power vet breather diagram.

On my one there is the Y section that splits of and it has a 90* 3 way joint put I can't see what the nipple that comes off it should plug into...any idea???

Whats does this little gadget do any way???

Any help would be great!! Very Happy

**Sun May 18, 2008 4:23 am » Post: #2 » Download Post**

Hi WhiteBaitNZ and welcome on board!

Can you post a photo of the part you are concerned about? It sounds like the 3-way joint that should normally plug into a little filter pressed into the bottom of the airbox. Is the joint white?
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun May 18, 2008 4:59 am » Post: #3 » Download Post**

I'm not quite sure how to upload a photo....... but yes the bit is white.

So that bit just goes into that hole and is held in by that clip bit???

Well thats my question answered!!! THANKS A LOT!!!!

Not having a workshop manual does make things more (stressful) interesting doesn't it!

Good work Andy

**Sun May 18, 2008 3:33 pm » Post: #4 » Download Post**

The Site and Forum are your workshop manual! Very Happy

Answers won't always be immediate, but somewhere along the line most things have been covered by someone here, and people will share their knowledge. Always try a search though, because if the info is easily accessible you'll soon know about it! Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!