I'm just rebuilding the front end of my NSR250 (MC21) & have noticed that the small wire brackets (that are bolted to the front of the frame) that are used to route the cables to the bars are missing.

From looking at the parts diagrams, there's one on each side of the frame, & the left one routing all the electrical cables up to the dials etc, & the right one routing the clutch cable.

I plan to make some out of 2mm wire (from a coat hanger), but am not sure of exactly what shape they should be.

Is there any chance that anyone with an MC21 that still has these guides could take a couple of photos showing each guide & how the cables run through them so that I have some idea of what shape I'm looking for please?

Your help is greatly appreciated.