f3 rad hoses

**Sun Feb 08, 2009 6:54 pm » Post: #1 » Download Post**

does anyone know what hose you use on the rad,i need the hose from the top head to the topleft outlet on the f3 rad.cheers si
_________________
ive seen more tarts than mr kipling

**Sun Feb 08, 2009 6:59 pm » Post: #2 » Download Post**

F3 rad is top head to top right of the rad.

Bottom head to middle right of the rad

Pump to bottom left of rad.
_________________
If I have to take the carbs off once more...

**Sun Feb 08, 2009 7:17 pm » Post: #3 » Download Post**

I think you'll find your rad is RS250 Si, not F3.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun Feb 08, 2009 7:18 pm » Post: #4 » Download Post**

oops thanks stephen, do you know if can you buy the hose i need from the top head to the rad? andy i think your right mate
_________________
ive seen more tarts than mr kipling

**Sun Feb 08, 2009 7:24 pm » Post: #5 » Download Post**

I think as Andy says thats an RS rad there is no correct hose for it. The MC28 HRC one might do the job though.

pn 19509-NKD-970
_________________
If I have to take the carbs off once more...

**Sun Feb 08, 2009 7:35 pm » Post: #6 » Download Post**

cheers mate and ive got lots of old rs turbo hoses in garage thats the same size so i might see if any could be made to fit Very Happy

_________________
ive seen more tarts than mr kipling