testing PGM III

**Tue Dec 30, 2008 3:54 am » Post: #1 » Download Post**

I've inherited a PGM III of unknown status. What is the best (and safest) way to determine if it is working? (stock loom except for wire splice) I've read about how things like frozen power valves can blow PGMs, but I'm wondering about the other direction, if popping this in can possibly blow something downstream. Do I just put it in and see if the bike starts/runs or is there more to it than that? Thanks for any help. Happy New Year.
_________________
-Jim
'93 MC21

**Tue Dec 30, 2008 5:41 am » Post: #2 » Download Post**

Just plug it in and try it!

"Things" break PGMs... duff PGMs don't break things! Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Dec 30, 2008 3:43 pm » Post: #3 » Download Post**

Are we talking about my wife or my bike now? Very Happy

Either way I'll give it a go! Thanks.
_________________
-Jim
'93 MC21

**Tue Dec 30, 2008 6:07 pm » Post: #4 » Download Post**

What, you'll give the PGM a go, or your wife a go? Shocked

I wouldn't mind plugging my wife in sometimes! Rolling Eyes

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!