I've got what I believe to be a mk1 mc18 loom here, part# 32100-KV3-7004.
It appears to be in perfect condition but has only one (green 2 pin) air solenoid plug. Is that correct?
The mk2 mc18 loom (that I used to retrofit the PGM-II to my old mc28 racebike) had two (2 pin) plugs which I hacked and spliced into one (3 pin) plug to use on the '28 carb setup.
Or maybe this loom is from something else though from the parts manual pics it appears both the mk1 and mk2 mc18's have one air solenoid plug...
wow, this is nearly a good question, Andy will be happy
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread
|
