Need Reeds and Dry Clutch Cover Gasket.

**Sun Apr 06, 2008 5:44 pm » Post: #1 » Download Post**

I have heard that reeds for a CR125 will fit any truth to this and does it have to be same year or what. Or if upgrade is recomended what would you go with...not racing just street riding

Any one have a clutch cover gasket they don't need, just realized I didn't get one with the parts I ordered for engine rebuild...already in the middle of the project so I need it quick.

Thanks for your help in advance
_________________
Mike

Last edited by mhunter1175 on Sun Apr 06, 2008 6:47 pm; edited 1 time in total

**Sun Apr 06, 2008 5:47 pm » Post: #2 » Download Post**

P.S. Andy, Mark from GPCustoms said to tell you hi.
_________________
Mike

**Sun Apr 06, 2008 9:27 pm » Post: #3 » Download Post**

If you mean the big side cover gasket, it is actually available from any Honda deal for about $7. I ordered mine from Ron Ayers.
_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm

**Sun Apr 06, 2008 9:36 pm » Post: #4 » Download Post**

what is the part number?
_________________
Mike

**Sun Apr 06, 2008 11:17 pm » Post: #5 » Download Post**

mhunter1175 wrote:what is the part number?

It just so happens I'm working on my bike so I have my parts box and manuals out.

11391-kv3-680

You can run a parts check on the Ron Ayers site. I think the cost was about $7.
_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm

**Sun Apr 06, 2008 11:55 pm » Post: #6 » Download Post**

oh I thought you meant it was a part for another bike that worked thanks for looking that up for me!!!
_________________
Mike

**Mon Apr 07, 2008 12:02 am » Post: #7 » Download Post**

mhunter1175 wrote:what is the part number?

P.S. sorry if that sounded pissy I didn't mean to come across the way it looks when I read it back.
_________________
Mike

**Mon Apr 07, 2008 7:04 am » Post: #8 » Download Post**

It doesn't sound pissy, it just sounds idle, after all the part number is just 6 mouse clicks from this post.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Mon Apr 07, 2008 11:15 am » Post: #9 » Download Post**

Again I appologize. I have a parts manual, I just didn't realize that I could get the part from a regular dealer using that part number... thanks again...

Anyone have any ideas on the reeds one set was ok so I would rather not buy carbon and replace the good ones unless I absolutely have too
_________________
Mike

**Mon Apr 07, 2008 4:16 pm » Post: #10 » Download Post**

I've got a couple sets of reeds I could probably part with.
_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm

**Fri Apr 11, 2008 2:04 am » Post: #11 » Download Post**

Got them today thanks a billion James!!!!
_________________
Mike

**Fri Apr 11, 2008 3:33 am » Post: #12 » Download Post**

Kewl.
_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm