rust on the inside of the tank

**Thu May 27, 2010 6:45 pm » Post: #1 » Download Post**

i was just wondering what is the best approach to sorting out the rust problem on the inside of a fuel tank?.
is there special cleaners products etc?

**Thu May 27, 2010 7:38 pm » Post: #2 » Download Post**

Haven't used this stuff personally, but know quite a few people with good results from it - http://www.kreemproducts.net/c-3-fuel-tank-liner.aspx

First you remove/dissolve the rust, then coat the inside of the tank with the resin compound.

**Wed Jun 02, 2010 1:48 am » Post: #3 » Download Post**

i've been debating how to solve this problem as well.

the Kreem product looks like a possible solution. i've also heard of inserting bits and bolts inside the tank, with diluted acid/water, agitating the tank and rinsing it out. then coating it with a similar Kreem product.

http://www.motorcycleanchor.com/motorcycle/how_to/mc_tankrust.html
_________________
MC28 sp

**Wed Jun 02, 2010 2:13 am » Post: #4 » Download Post**

i am also about to tackle this i have some form of liner in there atm but is just peeling off. Will post up the way i use

**Wed Jun 02, 2010 10:20 am » Post: #5 » Download Post**

You could try this.

http://www.kbs-coatings.com.au/KBS-MotorCycle-Tank-Sealer-Kit_p_13.html

Andy

Bandit7