MC18 base gaskets

**Fri May 28, 2010 7:53 am » Post: #1 » Download Post**

Hi guys,
Looks like I might need a new base gasket for my MC16/18. Just discovered a water seep from the top cylinder.
I had a look at TYGA but it looks like they only have HRC gaskets and I'm not sure on the thickness I need.
Does anyone know where I can get one in the southern hemisphere?
Or can a MC21 gasket work?
Cheers
Blair

**Fri May 28, 2010 8:53 am » Post: #2 » Download Post**

The base gaskets are the same mc18-mc21 only the head gaskets are different stock ones here in aus http://www.****.com/index.php?option=com_virtuemart&page=shop.browse&category_id=43&Itemid=26&vmcchk=1&Itemid=26

**Fri May 28, 2010 11:19 am » Post: #3 » Download Post**

OEM gaskets are 0.5mm. As nsrdownunder said, 18 and 21 share the same ones.

**Fri May 28, 2010 3:40 pm » Post: #4 » Download Post**

ALL stock NSR's use the same 0.5mm base gasket.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sat May 29, 2010 3:43 am » Post: #5 » Download Post**

Cheers guys, I'll re torque it down and check how it is and if it's still seeping, I'll replace.