Crank Rebuild RS250

**Fri Aug 13, 2010 7:28 am » Post: #1 » Download Post**

Hi i need some help finding the bearings for a 91 RS crank. I understand there is a gentleman who goes under the name of Max, who lives in Greece, who might be able to help me. Any contacts anybody. thanks

**Fri Aug 13, 2010 5:20 pm » Post: #2 » Download Post**

I think you mean mixalisen, or Michael.

**Fri Aug 13, 2010 9:39 pm » Post: #3 » Download Post**

How do i make contact with them. thanks

**Sat Aug 14, 2010 3:25 am » Post: #4 » Download Post**

This link will set you up to contact Michael:

http://nsr250.net/forums/privmsg.php?mode=post&u=601

You can access your PM's from the link at the bottom of the Forum Homepage. Look at the very bottom of the list of forum areas and you will see "Private Messages".

Make sure you have pop-ups enabled for NSR-WORLD and you will then see a message flash up on the screen if you have any new messages each time you visit the forum.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sat Aug 14, 2010 7:05 pm » Post: #5 » Download Post**

How do i do it Andy, sorry, give me a Torque wrench anyday. thanks