HRC Needle Holder

**Mon Nov 15, 2010 2:41 pm » Post: #1 » Download Post**

Can anyone tell me is this part is important? My HRC jets kits does not come with this..
If yes, anyone wanna sell it to me

**Mon Nov 15, 2010 3:39 pm » Post: #2 » Download Post**

The HRC emulsion tube is slightly longer than the stock Honda one so if you run the HRC adjustable needle without the HRC emulsion tube there is a danger if you use the top clip position the needle will jam in the main jet.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Mon Nov 15, 2010 4:58 pm » Post: #3 » Download Post**

The longer emulsion tube also alters the mixture.
_________________
If I have to take the carbs off once more...

**Mon Nov 15, 2010 10:42 pm » Post: #4 » Download Post**

Tks Stephen, but i have only A needle. What is the diffrent of A,B & C needle?

**Tue Nov 16, 2010 8:17 am » Post: #5 » Download Post**

A, B and C needles each have different tapers.

99% of the time the B needle is used. A needles are the richest, C needles the weakest.

I would say your HRC jet kit is missing a lot of parts.
_________________
If I have to take the carbs off once more...

**Wed Nov 17, 2010 2:10 am » Post: #6 » Download Post**

I will post the jet kits i have ...