Kit axle nut torque setting

**Sat Jan 21, 2017 4:24 pm » Post: #1 » Download Post**

Hello,
Would any one know what the torque setting would be for the large nut (on the wheel side) on a kit axle?
Honda RS250 NX5 with what I think is a Tachyon copy of the HRC kit axle for RC30/45.
Steel axle with alloy, left hand thread nut.
Thank you.

**Sat Jan 21, 2017 10:40 pm » Post: #2 » Download Post**

From the official HRC NSR500V manual: 280Nm (28kg-mf, 202ft-lb)

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun Jan 22, 2017 2:43 pm » Post: #3 » Download Post**

Thanks Andy. 👍

**Sun Jan 22, 2017 9:00 pm » Post: #4 » Download Post**

Fyi the NX5 manual says 118Nm for the rear wheel nut, and 235 for the rear axle nut.

**Tue Jan 24, 2017 3:26 pm » Post: #5 » Download Post**

TomB wrote:
Fyi the NX5 manual says 118Nm for the rear wheel nut, and 235 for the rear axle nut.

With the "small" (standard) wheel nut?
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Jan 24, 2017 7:21 pm » Post: #6 » Download Post**

I presume the standard nuts, as no other numbers are given. I just didn't want to see someone strip threads!