What do you guys use for protecting the paint on the bellypan from the heat of the exhaust? I recently used exhaust wrap for cars, but it's not resistant enough to the heat, and the paint started to blister.

Look on the good old flea bay, i'm sure you can get the proper stuff on there.
_________________
Proud Father of , 05 ktm 400exc supermoto 2018 honda crf rx supermoto

I use the genuine heat proof sticky pads

64109-NF5-750

Not cheap, but they stick like $h17 to a blanket, don't come unstuck when you wash the belly pan and wear well. I've had them last for a season or more. You'll probably need a couple on the Left, depending on your pipes.
_________________
If it ain't broke, fix it until it is.

I used a product from Zircotech with a ceramic layer, which is very thin
_________________
Why do things simply when you can complicate them

Is that the zircoflex 1, 2 or 3? I like that it is so thin.

I went for the thinnest. There are some pictures on my nsr rebuild
_________________
Why do things simply when you can complicate them

I also use the OEM Honda heat shields , I've tried other products but not found anything better .

RobH wrote:I used a product from Zircotech with a ceramic layer, which is very thin

Never seen that before. Looks very good. Also makes the OEM pads look cheap..
_________________
If it ain't broke, fix it until it is.

_________________
Why do things simply when you can complicate them