Mc21. Fuel tap
Mine has started leaking around the plate were it’s riverted it’s a original part , have any of you guys brought a after market from flebay if so are they ok , they look slightly different compared to the OEM one but a OEM is about £100
But a after market one is around £20 thanks guys..
Aftermarket one I got was used for 5 minutes. The seals inside swelled from race gas and made it very hard to open/close. Its in a landfill so replace. I was lucky and found an OEM which is working perfect with race gas.
Hi - got one from Impex japan for around $100 (australian) including shipping... Check japan.webike,,,,,,, It has the long spigot you need for the fuel tap, most have only a short spigot!
Cheers guys but I managed to fix it ,the rubber seal had given up I ground down the 2 pressed rivets , and drilled through the rivets with 3mm metal bit, opened the back plate and made a new gasket out of metal putty . Then pulled together with small nut and bolt . Worked a treat I’ll try to add some pics
Snap. Had the very same thing happen to me days before a track day.
Coincided with using Esso synergy super unleaded which I hadn't used before. I did the same removed the fave plate and used a plumbers o ring number 125 to replace and shape the o ring. Been on 5 days now and no leaks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum