Its been a long time but I finally got hold of another NSR project bike. This time an MC16 which brings back memories, last time I had one of these I was about 17 years old... long time ago
Inspecting the bike yesterday I noticed that the 2 CDI boxes had been relocated to underneath the pillion seat with extended wiring from the harness near the power valve servo. The rest of the wiring harness looks OEM.
I'm wondering if anyone has images of the OEM wiring harness installed in their bike, specifically the placement of the 2 CDI boxes so that I can look at restoring it back to OEM fitment. Any help appreciated.
If you are a member, the online manual has quite a few pictures of the unit locations in sections 17 to 19. It's in the members section at the top of the forum page. I found I needed to open the non-flash version _________________ Why do things simply when you can complicate them
Here are our English NSR250R Online Parts Manuals. Note that there are some errors in the English Online Parts Manuals, so it's always recommended to cross-check the part numbers when ordering, either here on the forums (where several Members own original copies of the manuals and will often confirm numbers for you), or against an official Japanese version of the Parts List, which you can find in the link below.
Updated manuals page with originl Japanese version PDFs that I'm slowly working on here: https://manuals.nsr-world.com/ _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum