Correct SubFrame

**Tue Feb 25, 2025 10:28 pm » Post: #31 » Download Post**

No mine has the elbow on the black plastic part like in the second picture. Bleeding was dead easy, just used a large syringe in the top of the pipe to keep feeding fluid in as needed.

**Tue Feb 25, 2025 10:29 pm » Post: #32 » Download Post**

I think I found the solution at Tyga here- I think I found the solution here! https://tyga-performance.com/product_info.php?cPath=72_1036_78_104&products_id=2544, but I'm going to fall for the coolness factor and get the HRC green tube. Smile

**Tue Feb 25, 2025 10:32 pm » Post: #33 » Download Post**

Good to know about the syringe. Thanks Zeus!

**Tue Feb 25, 2025 10:42 pm » Post: #34 » Download Post**

Hudtm60 wrote:I think I found the solution at Tyga here- I think I found the solution here! https://tyga-performance.com/product_info.php?cPath=72_1036_78_104&products_id=2544, but I'm going to fall for the coolness factor and get the HRC green tube.

Yes I forgot to mention you also need the little bung that goes in the top!

**Wed Feb 26, 2025 12:00 am » Post: #35 » Download Post**

I used one off Honda CR MX bike

Like this one but different year

https://www.ebay.co.uk/itm/156372297255?_skw=honda+mx+rear+break+master

Admin: Link edited to remove metadata

**Thu Feb 27, 2025 9:46 pm » Post: #36 » Download Post**

very interesting. will see if the HRC kit from Tyga works. Funny- it's going to get to me from Bangkok quicker than parts from California.