Standard jetting size

**Sat Aug 06, 2005 6:55 am » Post: #1 » Download Post**

Hi guys, new here. I just aquired a pgm 2. I would like to know it's standard sizes for the main, slow, and power jets. This would be a good basis as to where I would start from. I've checked the jets and my meaurements were 1.30+ for mains, .7 for power, and .3 for idle. Is that the stock jet setting. Thanks, It's great to be here Razz

_________________
ride it like a horse

**Sat Aug 06, 2005 7:34 am » Post: #2 » Download Post**

Hi there and welcome.

http://tech.nsr-world.com/nsr/nsr-all/carb-settings/ has all the standard carb settings.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Sat Aug 06, 2005 9:23 am » Post: #3 » Download Post**

There won't be much you can't find if you take the time to read the whole Site.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!