Semi-dead pipes...

**Thu Nov 03, 2005 2:55 pm » Post: #1 » Download Post**

Hi,

Can anyone in the UK recommend a company that can repair some Jha chambers I have? They have both been bent at the stinger side just after the expansion chamber....

TIA Smile

_________________
NSR300R - Why did i ever have a 250...

**Thu Nov 03, 2005 11:57 pm » Post: #2 » Download Post**

Try looking up Pete Gibbson (all speed). He pressure forms all his pipes but might be able to help you. Sorry i dont have his number at home but do at work, i'll post it if you cant find it on line.
_________________
If I have to take the carbs off once more...

**Fri Nov 04, 2005 3:26 am » Post: #3 » Download Post**

I bet "martin77" would do it for you, drop him a PM.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Nov 04, 2005 7:50 am » Post: #4 » Download Post**

tyr your local moto x shop they do this kind of thing all the time or at least point you in the right direction.
_________________
Farting is funny

**Fri Nov 04, 2005 10:31 pm » Post: #5 » Download Post**

Thanks for the input I'll try them. Cheers
_________________
NSR300R - Why did i ever have a 250...

**Sat Nov 05, 2005 3:24 am » Post: #6 » Download Post**

Remember martin77 is a member of the Forum however, and will be entrusted to build the NSR-WORLD race pipes as soon as I can get my act together. (Too busy with "other" things right now.)

Naturally I wouldn't recommend him if I hadn't already seen the quality of his work and wasn't prepared to commission him myself.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun Nov 06, 2005 1:46 pm » Post: #7 » Download Post**

send me a pic or two i mite be able to help.....

**Sun Nov 06, 2005 3:01 pm » Post: #8 » Download Post**

Andy;

Ever feel like this mate?

I'll try...

Pete Gibson (bet he's cheap), local MX shops? Come a little closer........

THERE'S A FORUM MEMBER WHO BUILDS PIPES, TRY PMING HIM.

And yes I know I'm shouting, no one's listening.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Sun Nov 06, 2005 4:24 pm » Post: #9 » Download Post**

i bulid custom two stroke pipes all day long. fixing yours mate not a prob just had to phone my gaffer to see if we can do them send me a pm and some pics if you me to do them

**Sun Nov 06, 2005 6:16 pm » Post: #10 » Download Post**

Andy;

Ever feel like this mate?

I'll try...

Pete Gibson (bet he's cheap), local MX shops? Come a little closer........

THERE'S A FORUM MEMBER WHO BUILDS PIPES, TRY PMING HIM.

And yes I know I'm shouting, no one's listening.

Who's not listening?
_________________
NSR300R - Why did i ever have a 250...