hey guys, just stripping my bike down getting ready for a full on mirror finish polish to everything alloy on the bike and getting anysteel repowder coated, anyways im up to the swingarm and just wondering how to take it off, ive got all the botls out but its still not bugging, guessing theres some sort of sleeve or something in there, any advice on this subject will be highly appreciated, cheers guys.

Which model do you have?
_________________

j911brick wrote:I got second dibs on those books you already sold.

NSR250R7N, mc21

just wondering if i would be needing any specialised tools? or anything like that also, cheers.

try taking out the adjuster on the right hand side of the bike i had the same prob last week

You dont need any specialised tools,its a simple job and takes about half an hour.sorry, didnt read that you have taken all the bolts out,if you have it should just fall out

There's that thing that has four teeth on the opposite side to what the big nut goes on. Its on the left side of the frame - i used a piece of aluminium bar and a mallet to knock it loose (tap it anti clockwise). The swingarm was then free.
_________________
After years of moaning about immigrants now i am one...