I have the chance to purchase another another PGMIV Memory card and an HRC card.
Now - before anybody gives me stick ... I've search the forum here and can't find the answer to my questions....
1. Is the 010 card the HRC card???
2. What are the model numbers for the 3 cards. I was lead to beleive there were 3 cards available 010, 020, 030. I did think the 030 was the HRC card but I have just seen a piccie of an HRC card with 010 written on it!
I thought the 010 was the stock card that came with the bike, the 020 slightly modified version available as an after market part and the 030 was the HRC
3. If I purchase another PGMIV card where can I get it reprogrammed? If so where?? Email and Web address please!
http://www.nsr-world.com/tuning/250-tuning/ignition/
Read it ..you will get enough knowledge for your MC28 _________________ 1996 HONDA RS250
1995 MC28 NSR250 SE red/white/green
1994 MC28 NSR250 sp W/ RS250 engine
Hi Guys - Actually I would like to know about the 035 and the "factory 525" cards! I haven't heard about these in the past.
The way I also understand it is that if I lose my factory "stock" swipe card there is no way of getting another re-programmed? _________________ 96 Respol Honda NSR250SP
I know that I revive a dead topic but as time pasts and cards become rarer it will concern many owners I suppose.
So my question is how difficult is to make a new card combining the 000 and the 030 in order to mak a road legal tunned curve card?
What were the JHA and the M Parts cards? Road legal(000) tuned with another sticker? A completely new development of these tuners? Or a race card(030)?
Afaik it is possible to transform a 000 to 030, I would liked to know how please. I know that it might be bussiness secret but asking is still for free
I am interested in DIY developing a card.
PS I wonder Honda intented MC28 to be a 40hp bike for good? How about a 50hp RC45 impossible to derestrict? Insane!
Ha ha.... the 525 card. I know Andy, Steve and I discussed this a few years back. We wondered if it was the card that held the map, or whether it just told the PGM which map to run.
Therefore our great thinking was that if all the card does is says 'turn on' & 'which map to run', then the 525 map already exists on the PGM IV and our programming friend in Japan should be able to access it for us.
I had this same conversation with Fontyy a few years back. On a race mc28 you can remove the card once it's been started and it still runs, therefore its either sending the whole map to the Pgm on initial startup or it is just telling the Pgm which map to run....my guess is the later. I thought someone else would have the tools to read the data a card sends by now?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum