Hi i bought some racing rear sets from the bike shop for my mc21. i went to put them on and realised that there is no hole in the brake leaver to mount the bracket for the tail light. does anyone know an easy way to fabricate one or another way to hook it up without drilling a hole through the lever.

Also the at the rear of the lever where it is mounted to the cylinder the small pin wont fit through the hole. would it be best to just drill out the a little or is there a smaller sized pin that i just havnt got... The rearsets look quite similar to the tyga ones if that helps at all... thanks

I dont normaly bother to fit a rear brake light as i hardly ever use it.

If you really want to fit one and there isnt a place to attach the switch buy a pressure switch. It replaces the banjo bolt that goes into the master cylinder. When the brake lever is depressed the fluid pressure in the brake line operates the switch and the brake light comes on.

I think Goodridge sell then as do brembo. I have one fitted to the front brake on the RC as there is no where for a normal switch.
_________________
If I have to take the carbs off once more...

Sounds like you've a set of racing plates. As above, use a banjo switch instead.
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

Anybody know what size the banjo bolt size is on an mc21 rear cylinder ?

M10x1.25
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Thanks Andy

Make sure that you buy one that does NOT have a allen key fitting for the banjo bolt.........They are absolute rubbish.
Buy one that has the hexagon body........They are the best.

possible post some pictures.

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

how much this selling at?

I think that mine cost me about £12.00.

Post removed for breach of Forum rules.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

mighty max wrote:
how much this selling at?

Click the image of the pressure switch!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Why is that Andy................Have I done something wrong..............Sorry if I have but can you explain and I`ll take care in the future.

Andy wrote:Post removed for breach of Forum rules.

Sorry Andy i'm a newb