mc18 barrel on mc21 front...

**Fri Oct 27, 2006 9:10 pm » Post: #1 » Download Post**

Just want to ask if an mc21 works fine with stock barrel and head for rear combined with an mc18 barrel and head for the front.
odd question ha? Confused

**Fri Oct 27, 2006 9:12 pm » Post: #2 » Download Post**

Its been known to work quite well in the past with no troubles.
_________________
If I have to take the carbs off once more...

**Fri Oct 27, 2006 9:19 pm » Post: #3 » Download Post**

ive noticed in the spefications that the compression for an mc18 is 7.3:1 and for an mc21&mc28 is 7.4:1
so i am sure that with both mc18 barells the mc21 will work but
with one mc18 barell and one mc21 barrel?

**Fri Oct 27, 2006 9:26 pm » Post: #4 » Download Post**

I repeat...

StephenRC45 wrote:Its been known to work quite well in the past with no troubles.

_________________
If I have to take the carbs off once more...

**Sun Oct 29, 2006 6:09 am » Post: #5 » Download Post**

I have run a MC21 with 1 MC21 and 1 MC18 barrel.
_________________
Poul
"If Life Gets Boring, Risk It!"
MC21SE, KISS box
MC21SP, HRC box, racing loom