Have you got any pictures or information. Yeah, I't bound to be buggered for that money, but you need to know how buggered before you pass it up. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Andy wrote:A complete Pro-Arm alone will cost half that!
Have you got any pictures or information. Yeah, I't bound to be buggered for that money, but you need to know how buggered before you pass it up.
Same thing as i thought - ill try to contact them (judging from the price im definalty sure it in need of TLC - full engine rebuild) and the new crank from honda, if any would cost practically the same as the bike and spending a hour on my lathe truing up the thing doesnt seem appealing) so most likly ill pass this one
sorry guys too late, im about too go and pick it up! i feel bad, i feel like im stealing it! it done 6000 ks, brand new crank, body is compleate but rough and slightly cracked, the top cylinder needs recoating and new piston. apart from that is sweet, ready to roll! comes with hrc card and full stainless steal exhaust system and jha cans. it hasnt been run for seven years so it will need a good once over but for $1500 aus dollars im not complaining! ill post some pics in an hour or two when i get it home! _________________ Hesitation is Fatal!!
I can't understand the mindset of 2-Strokes Rule... why discount a bike before you've even seen it?! Sounds like you may have a bargain there; and I hope so! _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
haha, i did buy it there and then on sunday morning as soon as i saw it! just tucked it up in the garage, i am quite impressed with my purchase i think for around another $5-600 and a little time and effort i could have easily a $6000 dollar bike as 2 are so rare here.. that is of coure is was to sell it. i Think its going to be my track bike and i'll keep my 21 for the road! i cant get the smile off my face, two nsr's in the shed looks so much nicer than one (even if they are both in pieces) _________________ Hesitation is Fatal!!
Nah, i dont really care - im a poor 16 yearold who needs to still get his licence lol and anyway the earliest i saw the ad was on saturday and when i rang up no answered (all 4 times) so even if i could contact him id make it for l8 sunday which'd bee too late anyway...
So how is the bike? what are the main problems? cylinder/piston and body?
(a 1.5k bike that claims to "needwork" would be in need of a fair bit of work wouldnt it?)
I can't understand the mindset of 2-Strokes Rule... why discount a bike before you've even seen it?! Sounds like you may have a bargain there; and I hope so!
i would have seen it if he would pick up his phone anyway even if i did see it i still wouldnt have got it (until after reading some of these posts) because if it had a stuffed cylinder i wouldnt have a clue how much recoating + new piston would cost...
I'm sitting here at college and feeling some what - pissed off, becuase now that i have thought long and hard about it; that NSR is probally my only chance of ever buying one
Becuase in sh*t hole tasmania i probally wont ever find another NSR for sale which is a real shame becuase i had enough money to buy it (i only have 1.5k seeing as i havent gone to work for ages - at my dads friends shop) so seeing as it was ono i could have brought the price down a bit and my dad would have easily gave me the extra to fix it up...so now im really pissed and what makes it worse it that i asked for help (reason for this thread) and what i wanted to buy was practically "stolen" - unless of course 2stroker was after that bike b4 i started this thread...
So anyway, i hope you have sucess with your new bike (itll make one more down here in tas; for me to watch ride by)
2-Strokes Rule wrote:
...most likly ill pass this one...
As far as I'm concerned, you had already clearly shown your disinterest; for several reasons - cost, condition, personal circumstances... er, lathe work?!
What was everyone else supposed to do, wait until you had definitely maybe possibly made your mind up for sure?! _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
sorry!! but no i actually rang about it on tuesday... its in pretty good shape, ive found a new (second hand but good shape) rear cycinder already for $300, both new piston and rings will be about $300..body is really fine, just 1 plastic weld needed apart from that its nice. He wasnt negotiable on price because hed had a fair bit of interest so i paid $1500. Its not complianced but if i want to ride it on the road ill just swap the plates off my 21 onto it. 2 stoke-rules, i think mine are the only two in tassie but my 21 may be up forsale soon, ill contact you first if i do decide to sell. You wont beable to ride it after july anyway if your on your L's because of these new bull s#*t power to weight ratio laws! oh and im a poor 16 year old aswell but ive now got 2 nsr's! _________________ Hesitation is Fatal!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum