YO!

Does anyone know if the front wheel fitted by Honda to the NC35 was also used on any other Honda models? Seeing as the NC35 has some brake parts in common with the fireblade of the time i wondered if it, for example, or any other Hondas used the same front wheel?

Does anyone have any decibel figures for Tyga NSR250 exhaust systems? Particularly useful would be figures relating to a machine with the 300cc kit fitted if anyone has measured that? This is all in aid of making sure i can turn up at trackdays without having to worry about them kicking me out because my bike is too loud...

Thanks in advance for any help!
_________________
After years of moaning about immigrants now i am one...

I don't understand the first part of this post! What will you gain by fitting an NC35 front wheel? Even though the discs are bigger than the NSR, what good will that do you?

NC30 and NC35 disks bolt right up to the NSR wheel anyway. Still no good on an NSR.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

I have an RVF400 fork on my MC21 and i want to have a second set of wheels with wet tyres on ready to swap over to in bad weather. I have pilot race tyres on my dry weather wheels, which are on the bike now.

I have a spare rear wheel (original MC21R) already, i just need another RVF front wheel. The reason i asked what other bikes use the same wheel as the RVF is to make it easier to find one that suits my bike - i have struggled to find RVF parts in good condition in the past. So if the fireblade/firestorm etc used the same wheel i could get one of those because they will likely be easier to find.

Hope that made sense, sorry if not! D'oh!
_________________
After years of moaning about immigrants now i am one...

How about a nc30 front wheel?

NC30 wheel should fit as should VTR firestorm and CBR600F (90's one not the new FS etc).
_________________
If I have to take the carbs off once more...

Thankyou very much
_________________
After years of moaning about immigrants now i am one...

Hermit wrote:
I have an RVF400 fork on my MC21...

Ahh... nice to have the full story!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Graham France is now selling BRAND NEW wheels for VFR /RVF 400's, at £199 a piece (for rears anyway). My brother bought one last week and is very pleased with it.

Maybe hw can help...
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

Hermit wrote:Does anyone have any decibel figures for Tyga NSR250 exhaust systems? Particularly useful would be figures relating to a machine with the 300cc kit fitted if anyone has measured that? This is all in aid of making sure i can turn up at trackdays without having to worry about them kicking me out because my bike is too loud...

Thanks in advance for any help!

Tyga pipes and a modded airbox get you chucked off quiet (98db) trackdays.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

My 300 was often very quiet
_________________
If I have to take the carbs off once more...

My bike with TYGA mild steel pipes and carbon cans, with an airbox lid but no filter was measured at 105dB. Right on the race limit.
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

Wow! Can 40hp make that much noise Dave?!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Dunno, it was making 62 that time!
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

Dave Ett wrote:
Holey crap that is Loud...

Well they were race cans, and if 105 is the limit, then they were absolutely perfect!

Almost any front wheel from the 90's honda sport range have the same fitment, so spares are easy to find.

My 300 with Tyga's measured at 104.8dB. The DogFight's I had were louder!
_________________
NSR300R - Why did i ever have a 250...