I have just spent a couple of hours looking for info on the NC35 as I need to get some info on rebuilding the forks. The bike came with the new seals, but I cant find any specs on what type and what amount of oil to put back into them.

Anybody know where I can find this info?

Thanks, Steve
_________________
MC21
04 NSR50R
93 CBR F2
98 CBR F3 track bike
95 VFR750
89 FL400R Pilot
90 FZR 4/600

Go to the site below and search under "Forks"

www.400greybike.co.uk

Thanks calinsr. I searched since you've replied with no luck.... So I posted the same question there.... We'll see if those guys are as helpful as you here, hope so
_________________
MC21
04 NSR50R
93 CBR F2
98 CBR F3 track bike
95 VFR750
89 FL400R Pilot
90 FZR 4/600

Hope this is what you are looking for. Info from haynes manual.I also replied on the 400 board.

Specs :

Oil: 10w
Capacity: 450cc
Oil level: 74mm
Spring free lenght: 234.3mm

Sounds good calinsr, thanks.... That is for the upside downs correct?
_________________
MC21
04 NSR50R
93 CBR F2
98 CBR F3 track bike
95 VFR750
89 FL400R Pilot
90 FZR 4/600

This is for the RVF ( upside down forks). I have the hayne's manual, so let me know if you have any other questions.

these guys might be able to help you out. they are always friendly and you can find the info on the website. i use them to give me advice and have sent poor forks off for the business and they are very helpful and know there stuff and they can offer this advice free. yes free, yes free...is there an echo around here.

let them know your weight, typw of set up as this might affect the spring rate and oil levels etc.

0150810625 if you live in the middle of nowhere you can ask them questions from the website.

hope it helps

or since you are in the US.

www.traxxion.com
www.le-suspension.com

Missed that one, didn't i.