think you can buy one from tyga or make one out of an old socket. i went down to my local honda dealer and asked to borrow one and amazingly they let me keep it!
alternitively you can always use a soft drift _________________ wadda ya mean its too fast!
We've gone through this exact topic just recently. I will say it again... a drift is a VERY BAD idea. I haven't done it on mine, but I have seen alloy frames with big gouges where they slipped with the drift.
It's easy to make the tool from a piece of tube. Hayne's have been telling us how for years! Either weld a socket on the end once you've made it, or drill a hole through the end to use a bar with it (in the same way you would a box spanner).
I think I have the Honda part number here somewhere, and I think sandkingeleven is correct in saying that TYGA sell the tool too. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
