Wanted scrap/unwanted mc18/21/28 engine parts

**Wed Jul 09, 2008 10:20 pm » Post: #1 » Download Post**

am putting together a cut away engine for the stand at beaulieu next year and need your donations of any engine parts that are unserviceable or of no use to you

thanks fenton

Admin: Stickied until John amasses all the parts to complete the project! Smile

**Thu Jul 10, 2008 12:04 pm » Post: #2 » Download Post**

Hi Fenton,

I have a cankcase if you want that, one of the crank bearing pins sheered off & scored a nice big groove. I was unable to use for the rebuild Crying or Very sad

all yours if you want Very Happy

**Thu Jul 10, 2008 12:53 pm » Post: #3 » Download Post**

thanks mate ill drop you a pm when ive found the cost of postage

thanks

**Thu Jul 10, 2008 4:53 pm » Post: #4 » Download Post**

I hope I don't have any unserviceable engine parts from my motor before Beaulieu 09, but if I do they are reserved for your project Laughing

Cut-away engine is a great idea Fenton Cool

_________________
Rich
MC21 Track Bike / RS250 NF5 'Spencer', NX5 'Cadalora' & NXA 'Aoyama' / RS500 / Two Brothers Racing RC30

**Thu Jul 10, 2008 5:03 pm » Post: #5 » Download Post**

it will be cool to show the rest of the motorcycling community a bit deeper inside the nsr i did notice that this year at Beaulieu there was a lot of people looking at fontyyys unfaired bike

**Fri Jul 11, 2008 2:35 pm » Post: #6 » Download Post**

Me and some friends have accumated some blown up engine parts and gearbox parts over the years you can have, but we are in Japan...you would have to come and pick them up or arrange for shipping.....I could ship them but it would cost more to ship than they are worth....your project sounds very cool though, wish I could help out more.

Jamie

**Fri Jul 11, 2008 2:48 pm » Post: #7 » Download Post**

thanks for the offer jamie how much do they weigh ? it mite be worth shelling out for shipping to get the job done. here in the uk all the unserviceable parts are used as door stops it seems Laughing

thanks

**Fri Jul 11, 2008 3:08 pm » Post: #8 » Download Post**

ive got some old pistons lying around you can have Very Happy

_________________
ive seen more tarts than mr kipling

**Tue Jul 15, 2008 6:05 pm » Post: #9 » Download Post**

anyone else got anything lying about ?

**Thu Jul 17, 2008 11:53 am » Post: #10 » Download Post**

this first list of Parts are neeed so i can make a start

cylinders 18/21/28 (fontyyy has donated a front and rear cylinders)
cylinder heads 18/21/28 (fontyyy has donated a front and rear head)
clutch side casing r/se/sp
crankcases (ive found a set in my loft)
pistons (silikesguiness )
Engine nuts and bolts

If you have ANYTHING that will help toward the project can you pm me or put a post up

Thans fenton

Last edited by fenton on Fri Sep 19, 2008 11:15 am; edited 4 times in total

**Thu Jul 17, 2008 11:57 am » Post: #11 » Download Post**

ive got the pistons and a front head for you mate Very Happy

_________________
ive seen more tarts than mr kipling

**Thu Jul 17, 2008 12:01 pm » Post: #12 » Download Post**

thanks mate Very Happy

**Thu Jul 17, 2008 3:11 pm » Post: #13 » Download Post**

and ive dug out a rear head you are welcome to Very Happy

_________________
ive seen more tarts than mr kipling

**Sat Jul 19, 2008 9:42 pm » Post: #14 » Download Post**

one more bit off the list ! cheers Very Happy

**Wed Jul 23, 2008 9:13 am » Post: #15 » Download Post**

PM Sent

Cheers

Mark