Brakes

**Sun Aug 24, 2008 6:22 pm » Post: #1 » Download Post**

Hi does anyone know what alternative discs will fit the standard MC28 front wheel,??
I am looking for a disc of around 300mm.

BR.

Dave.
_________________
MC28, Honda RC30,
BMW GS1200.
1000cc Bonnie.

**Sun Aug 24, 2008 6:25 pm » Post: #2 » Download Post**

Most Honda discs will fit, but you will need brackets to space the calipers out.

The easiest to source would be NC30 (most used ones are shagged!), NC35, NC29, or VTR1000F, all 296mm.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun Aug 24, 2008 6:33 pm » Post: #3 » Download Post**

Andy,
Do you know if the discs you suggesst ( NC30 are the same offset as the NSR?) I am fitting UDS forks and have found method of using NSR front wheel but forks were designed for 300mm discs , I need discs with same "offset" as NSR.
BR

Dave.
_________________
MC28, Honda RC30,
BMW GS1200.
1000cc Bonnie.

**Mon Aug 25, 2008 1:30 am » Post: #4 » Download Post**

NC30 are what I originally fitted to my MC21 with NF5 RWU forks, then with my NF5 USD forks, and then with my Magtek with NF5 USD forks before I fitted the cast iron NX5 discs... Honda are like that! Wink

HRC aren't like that though! Although the offset of my cast iron discs are the same, the diameter is 297mm and will only work with HRC calipers! Good job I have a couple of pairs then! Very Happy

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!