Help me, someone grab a tape measure

**Tue Oct 21, 2008 5:06 am » Post: #1 » Download Post**

can someone run a tape measue across the head light on a mc21 and a mc28 and tell me the size of the light so i can tell top fairing i have , i have done a quick measurement and its 18 cm across the middle , and the head light i have is 21 cm across

i think i have a 28 light , and a 21 fairing

**Tue Oct 21, 2008 7:25 am » Post: #2 » Download Post**

MC21 nose cone

The 28 nose cone has two strakes in it and has a wider appearance.

**Tue Oct 21, 2008 9:12 am » Post: #3 » Download Post**

The headlights are the same for both bikes.
_________________
NSR300R - Why did i ever have a 250...

**Tue Oct 21, 2008 11:35 am » Post: #4 » Download Post**

Max is right.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Tue Oct 21, 2008 12:08 pm » Post: #5 » Download Post**

So is Fontyyy Very Happy

**Tue Oct 21, 2008 1:54 pm » Post: #6 » Download Post**

I recently sold my 28sp upper cowl for use on a 21se,I have since been infomed that everthing fitted fine.
_________________
MC28 ROTHMANS SP
MC28 SE R2T
TZR 3XV9 RS
TZR 3XV4 R
RGV250M
RS250 HARADA
CBR400 NC29
VFR800FIY
CB1000 BIG ONE
ZOOMER 50
MB5
749R
ZX7R P6
FZR400RRSP 3TJ2
YZF750R
GSXR750WT

**Thu Oct 23, 2008 11:27 am » Post: #7 » Download Post**

although the headlights are the same, I think that the 28 upper cowl uses a different (lower?) upper stay. This I think is the reason, for the different , more aggressive appearance. Then again nothing of this might be true Embarassed

**Thu Oct 23, 2008 12:35 pm » Post: #8 » Download Post**

The different stay is just because of the PGM-IV being mounted up front -- the front mounting point is still in the same place.

The difference in shape is mainly in the screen and the area above the mounting point, which is raked back further than the MC21.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Oct 23, 2008 2:08 pm » Post: #9 » Download Post**

...so when you want to use a MC28 cowl, on a MC21, with MC21 bodywork, what stay do you have to use?

**Thu Oct 23, 2008 2:45 pm » Post: #10 » Download Post**

Andy wrote:
The different stay is just because of the PGM-IV being mounted up front -- the front mounting point is still in the same place.

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Oct 23, 2008 3:11 pm » Post: #11 » Download Post**

ok then, I need a pair of glasses...

Help me, someone grab a tape measure

Help me, someone grab a tape measure

RE COWL