Hello all,

So, i have my new chamber fitted on my NSR150SP, pictures to follow! I used the original silencer with an aftermarket chamber, it sounds sweet.

Anyway, the carb, i have raised the need a clip and have installed a #155 main jet instead of the #152.5. I'm running a cone filter (amazing - 100 baht). I've read the NSR250 carb jetting guide over and over and the information there is great, very well put together!

I need to know if the information shown here: http://www.nsr-world.com/tuning/250-tuning/carburation%20index/jetting/ regarding the set-up can be followed for my STD PE26 bike as well, obviously a lot is 250 only such as HRC kits, but, i think the actual setting up procedure should be the same?

Any help on this would be much appreciated!

P.S still awaiting my 250 carb, waiting for my supplier and want to get it running so i can ride quick on the STD carb,

Cheers . .
_________________
I love my Honda NSR150SP

I hope someone can help me with the above. Here's some pictures of my exhaust all fitted, hope y'all like:






_________________
I love my Honda NSR150SP

not sure you will get a answer here mate about jetting there is a dedicated forum however in the members section.

hi fenton, thanks for your response, fingers crossed i get a reply

btw your NSR looks spot on, the paint scheme of black/red is just right!