Please bare with me this is my first post !

Tried to order a MC 18 piston, pin, circlips, rings and small end bearing today for my MC16.

The vendor told me that there are 6 different pistons for the MC18 so they need engine numbers before they can order.

So as I dont have an MC 18 engine does anybody know the part numbers of the bits I need?

Any help would be greatly appreciated.

There are 3 different barrel types, A, B, and C. You need to know the barrel(s) you have (they may not necessarily be the same!) and then order the corresponding piston.

A barrel + B piston
B barrel + # piston (no mark)
C barrel + D piston

Don't ask why the middle piston isn't a "C"... no-one knows!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Seeing as the barrels are in my shed, I'll have a look for a stamp

Ok.. how do I ID the barrels?

Thanks!
Paul

on the back of the barrel at the bottom near the stud hole there will be a letter stamped on it

Ok all sorted thanks