Good evening!

I am trying to look for different ways of upgrading my mc16's running gear, for various reasons, tyre choice and looks being high up the list.

I have a TZR250 3XV swingarm in the shed but its about 1" longer than the '16's item. I was hoping to save this for another project anyway.

MC21 stuff rarely comes up and I expect it to be quite costly due to the rarity value.

Soo I have been looking at CBR400 NC29 kit as this seems to be reasonably available for not much dosh. Has anyone used any gear off the cbr400's in the past?

Any advice gratefully recieved!

Thanks
Paul

The CBR (and VFR) shocks are in different positions to the NSR. The CBR is wildly different.

Your best bet is an MC18 swingarm. Mk1 will go straight in, or a Mk2 will fit if modified slightly. Do a search... it's all be covered before.

An MC21 rear wheel will go in an MC16 swingarm. Jeff350lc did it years ago.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Ok Andy, thanks. The nc29 item looks quite heavy too so doubt it would do

Will have a look for an '18 swingarm and wheels.

Cheers!
Paul

if its of any use i will have my 21 swingarm (painted black!) surplus to requirements shortlly as i have an unpainted one on the way, slow boat from japan so not here until the end of march

Theres a MC18 swinger on the Evil Bay at the moment