nsr front disc advice

**Wed Oct 14, 2009 7:14 pm » Post: #1 » Download Post**

Has anyone took a nsr front disc apart.

why i ask is that id like to replace my bobbins and have found a supplier but need to know what diameter the hole is in the disc. carrier.

anyone help please

**Wed Oct 14, 2009 7:28 pm » Post: #2 » Download Post**

Hi Beek ,i have stripped a few discs , i had 100 disc rivots made(cheaper ) and have had no problems . It is a easy job .Neal

**Wed Oct 14, 2009 7:35 pm » Post: #3 » Download Post**

Thanks mate what size is the hole
could you measure one for me please

**Wed Oct 14, 2009 7:39 pm » Post: #4 » Download Post**

I will measure one for you in the morning .

**Fri Oct 16, 2009 6:51 pm » Post: #5 » Download Post**

Hi Beek ,

i measured 14mm . i have a set if you need .

Cheers , Neal

**Sat Oct 17, 2009 5:14 pm » Post: #6 » Download Post**

Neal
Ive sent you pn re bobbins

**Mon Oct 19, 2009 6:10 pm » Post: #7 » Download Post**

try this link Beek .http://www.bikepics.com/pictures/1808018/

**Tue Oct 20, 2009 2:36 pm » Post: #8 » Download Post**

Why do you want to replace them?
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

**Tue Oct 20, 2009 9:18 pm » Post: #9 » Download Post**

The anodising on the centres has worn and ive sprayed them but paint is coming of to easy due to anodise underneath so only option seems to be strip the discs and sort the centres out and reassemble. anyone got any ideas of refurbishing the centres without taking them apart id appreciate advice

**Tue Oct 20, 2009 9:55 pm » Post: #10 » Download Post**

Your reasoning is sound beek, just make sure the bobbins are the correct size.

Personally I would leave out the springs upon reassembly to convert the discs to fully-floating too, if the "clinking" noise of them doesn't annoy you too much!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Wed Oct 21, 2009 6:20 am » Post: #11 » Download Post**

Thanks Andy

I do have acess to proper bobbins to make them floating but are not cheap
ive already converted the rear disc to fully floating

what do you think

**Wed Oct 21, 2009 5:42 pm » Post: #12 » Download Post**

Hi Beek , I like your rear disc !I had my disc centres anodised black , i think they look good . Cheers , Neal