MC28 Want to used HRC P010 but still all light.

**Thu Sep 15, 2011 9:18 am » Post: #1 » Download Post**

Hi.I'm a new members my name is New at Ubon.I want to used HRC P010 but still all light on road.I want the sample picture of editing wiring.I do not know if anyone has some?Thank for you help

**Thu Sep 15, 2011 10:23 pm » Post: #2 » Download Post**

Sawadee "New at Ubon", and welcome to NSR-WORLD.

Please see MC28 wire splice in the 250 Tuning Section for the information you are looking for.

Please note that some warning lights will not work with an HRC card. Also the speedo (odometer) will not work. You will need to either live without it, or use an aftermarket digital speedo. Even just a bicycle (MTB) speedo if often enough just to see "about" how fast your are going.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sat Sep 17, 2011 3:30 am » Post: #3 » Download Post**

Andy wrote:Sawadee "New at Ubon", and welcome to NSR-WORLD.

Please see MC28 wire splice in the 250 Tuning Section for the information you are looking for.

Please note that some warning lights will not work with an HRC card. Also the speedo (odometer) will not work. You will need to either live without it, or use an aftermarket digital speedo. Even just a bicycle (MTB) speedo if often enough just to see "about" how fast your are going.

Thank you very much for your help.It make inspiration to me for modify it.When modify a wiring to use with HRC card standart card it not work with modify wiring?Thank again.

**Thu Sep 29, 2011 7:55 am » Post: #4 » Download Post**

Hi and welcome to the forum...

Also the stock card will work on the modified harness...

Cheers
Michael