fly wheel

**Thu Sep 22, 2011 9:07 am » Post: #1 » Download Post**

Hi guys, I,m interested to A.C.HRC flywheel 31100-nkd-970 (very expansive)
Question: this flywheel work on my MC28 wire loom modified to(hrc card 030)
and the lights, and battery charge, work with this item?'

Guys can give me information.. Laughing

P.s (help me Matt and fontyyy Crying or Very sad

)
_________________
Alessandro Cucco
via Brigate Partigiane 43c
54033 Carrara (MS) Italy

**Thu Sep 22, 2011 9:32 am » Post: #2 » Download Post**

I think you have already asked this question in the HRC section have you not?
_________________
If I have to take the carbs off once more...

**Thu Sep 22, 2011 1:56 pm » Post: #3 » Download Post**

yes bat I don't access to hrc forum I'm carbon member!! Crying or Very sad

_________________
Alessandro Cucco
via Brigate Partigiane 43c
54033 Carrara (MS) Italy

**Thu Sep 22, 2011 2:52 pm » Post: #4 » Download Post**

Yes... it works - simply plug 'n' play!

**Fri Sep 23, 2011 4:23 am » Post: #5 » Download Post**

i tot the 030 already has ignition advance.
so is it advisable to still use the hrc or mc21 flywheel or even the 2 degree woodruff key?

**Fri Sep 23, 2011 5:31 am » Post: #6 » Download Post**

HRC support is only in the Members Area.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Sep 23, 2011 8:59 am » Post: #7 » Download Post**

I'm Sorry Andy ! Embarassed

I ask only this information to be sure of the operation (recharge battery and lights ok )

I' don't purchase this part if not work !

I'm carbon member now !

You can me send P.M for this info !I think you can understand me Crying or Very sad

_________________
Alessandro Cucco
via Brigate Partigiane 43c
54033 Carrara (MS) Italy

**Fri Sep 23, 2011 12:59 pm » Post: #8 » Download Post**

The message was in response to cookiesol asking about a performance related question regarding the HRC flywheel.

As divice says, the flywheel is just a plug'n'play item... it uses the same connector as the OEM harness.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Sep 30, 2011 1:55 pm » Post: #9 » Download Post**

Ok it's a plug and play, bat recharge is not enough for Mc 28 battery , HRC has created it for race
There is possibility to use on MC 28 standard wire and battery ?

See my P.M

Thanks
_________________
Alessandro Cucco
via Brigate Partigiane 43c
54033 Carrara (MS) Italy

**Fri Sep 30, 2011 4:54 pm » Post: #10 » Download Post**

Simple answer is no-one here really knows! As far as I'm aware, no-one of the forum has ever actually used the HRC generator as it's so damn expensive, and the gain will be marginal relative to the cost. You could save more weight by going to the toilet before going out for a ride! What you may gain is a little crisper throttle response.

Given the size of the stator, I would assume that it only really generates enough power to run the basic electrics. I don't reckon it will keep up with the discharge rate of the battery if you use lights, indicators, horn, brake lights etc.

Making a race AC generator that's capable of producing enough currant to run road electrics was probably the last thing HRC were thinking about when trying to screw as much as they could out of the MC28 for the SP class.

Just my opinion and best guess, given the information available.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Sep 30, 2011 5:37 pm » Post: #11 » Download Post**

Thank you Very Much Andy Wink

for your availability' and patience Embarassed

_________________
Alessandro Cucco
via Brigate Partigiane 43c
54033 Carrara (MS) Italy

**Sat Oct 01, 2011 9:34 am » Post: #12 » Download Post**

Hi Kukkos,

i have use the MC28 HRC Flywheel and stator in the past to my MC28 (i have sold it now)... As Andy correct said this part was made only to produce enough current for the PGM + Coils + RC Servo Motor and stuff like that... As for the gain that you will have will be noticible only i think on the dyno... At least i didn't feel any difference vs stock set up when i rode my bike...

But most people here don't care if they have a major gain from a part but they care most if it is a genuine HRC part (i am one of them to be honest Embarassed

)... This is a big true that most of the guys here have to admit...!!!

Cheers
Michael

**Sat Oct 01, 2011 12:21 pm » Post: #13 » Download Post**

mixalisen wrote:

But most people here don't care if they have a major gain from a part but they care most if it is a genuine HRC part

That's because we KNOW it's faster, just because it says HRC on it. Cool

_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

**Sat Oct 01, 2011 12:28 pm » Post: #14 » Download Post**

How can i argue with that now Dave...??? Embarassed

**Sat Oct 01, 2011 4:32 pm » Post: #15 » Download Post**

Dave Ett wrote:That's because we KNOW it's faster, just because it says HRC on it.

It's also going to be in this case something like a grand or so for a gain I'll bet is under 1 bhp.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread