Steel SP clutch plate wanted

**Mon Jun 25, 2012 8:55 am » Post: #1 » Download Post**

I need one of the thicker steel plates for an SP dry clutch if anyone has any lying around. Turns out I am 1 short so causing slippage!

Before the weekend if poss? Race Sunday Smile

_________________
More **** two strokes than you can shake a **** stick at.

**Mon Jun 25, 2012 12:12 pm » Post: #2 » Download Post**

i will have a look in the garage paul,i have some dry clutch bits lying around
_________________
ive seen more tarts than mr kipling

**Mon Jun 25, 2012 12:37 pm » Post: #3 » Download Post**

Nice one Si Smile

_________________
More **** two strokes than you can shake a **** stick at.

**Tue Jun 26, 2012 12:25 pm » Post: #4 » Download Post**

I can chuck one in the post if you want or bring it to Cadwell on Friday if you're there?

I've also got a set of new fibre plates if you need them.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Tue Jun 26, 2012 1:07 pm » Post: #5 » Download Post**

If you dont mind mate, its one of the thicker ones I need,4mm ish? Not going cadwell unfortunately so if you could post one thatd be ace!
_________________
More **** two strokes than you can shake a **** stick at.

**Tue Jun 26, 2012 2:16 pm » Post: #6 » Download Post**

It's one from my race bike so I do need it back sometime, but judging by how rough it feels turning the flywheel I wouldn't hold my breath on that!

It'll be in the post this afternoon.

***edit***
it's in the post
***edit***
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Tue Jun 26, 2012 3:41 pm » Post: #7 » Download Post**

nice one john,i only had a thinner plate kicking around Rolling Eyes

_________________
ive seen more tarts than mr kipling

**Wed Jun 27, 2012 11:17 am » Post: #8 » Download Post**

Cheers John & Si. Helping me out of the shoite again! Laughing

_________________
More **** two strokes than you can shake a **** stick at.

**Wed Jun 27, 2012 2:20 pm » Post: #9 » Download Post**

its no trouble mate Very Happy

_________________
ive seen more tarts than mr kipling